![]() ![]() Do nothing further to the floor until it has had a chance to fully dry, then dry buff the surface with a polish pad and recoat. If streaking appears after more than three coats of finish have been applied, the most likely cause is “cut in.” This occurs when the top coat of finish appears to be dry enough to apply the next coat, but there is still moisture Recoating too soon before prior coat has dried properly If a coat is applied too thickly, dry buff with a blue pad and recoat. If residue has been left on the floor surface, or an alkaline stripper was not properly rinsed prior to applying floor finish, re-stripping of the floor will be required.Īpply each coat evenly and thinly. Avoid using wrung out mops.īe sure mop heads are washed thoroughly before applying finish. Scrub and recoat do not overwork the mop. Too little polish in mop during application Whether you have time constraints to maintain finishes properly or you want the highest appearance level, we have a floor finish for you. Betco® offers a complete line of high-performing finishes to satisfy a variety of facility and maintenance program needs. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |